FT-1000L2 Electric Reclamation Mower | 7500W Electric Mower for Heavy Brush and Reclamation
Model: N/A
电动重型植被处理机，7500W 电机驱动合金马蹄刀片切割 15cm 直径灌木，双液压升降臂 0-55cm 行程，860kg 重量开启电动土地管理新品类。
Key Features
Advanced technology for effortless lawn care
7500W Maximum Motor Power
The most powerful motor in the entire Fengte lineup - 7500W high-precision resolver at 3700rpm with alloy horseshoe blad
15cm Brush Cutting
Alloy horseshoe blades cut through brush and branches up to 15cm diameter - shredding them into organic mulch.
0-55cm Dual Hydraulic Arms
The largest lift range in the lineup - dual hydraulic arms raise the deck 0-55cm.
30.8kWh LiFePO4
72V 430Ah battery for 8 hours of heavy-duty operation.
60 Deg Working Slope
60 degree maximum working angle for extreme slope reclamation.
860kg Structural Weight
The heaviest machine in the lineup - reinforced structure for sustained heavy-duty operation.
Product Details
Comprehensive product description and features
Bottom Line Up Front
The FT-1000L2 Reclamation Mower is not just a mower - it is an electric heavy-duty vegetation processing machine. Its 7500W motor drives alloy horseshoe blades that cut through 15cm diameter brush, while dual hydraulic lifting arms provide 0-55cm of deck travel. At 860kg on a 60 degree slope, it opens a new category of electric land management.
Not Just a Mower - A Vegetation Processing Machine
The FT-1000L2 Reclamation Mower creates a new product category: the electric heavy-duty vegetation processor. Unlike conventional mowers that cut grass, the FT-1000L2 7500W alloy horseshoe blade system cuts through brush and branches up to 15cm in diameter, shredding them into organic mulch.
Alloy Horseshoe Blades
The alloy horseshoe blade design is fundamentally different from conventional mower blades. Each horseshoe-shaped blade swings independently, cutting through woody vegetation by impact rather than slicing. This handles mixed vegetation - grass, weeds, bushes, and saplings - without clogging.
Dual Hydraulic Lifting Arms
The 0-55cm lift range provided by dual hydraulic arms is the largest in the Fengte lineup. This allows the operator to set cutting height from ground level up to 55cm above ground for clearing tall brush while leaving the root system intact.
Technical Specifications
Model | FT-1000L2 Reclamation |
Application | Reclamation mowing, brush cutting (up to 15cm) |
Power | Pure electric (LiFePO4) |
Vehicle Voltage | 72V |
Battery Capacity | 430Ah |
Battery Energy | 30.8kWh |
Battery Type | LiFePO4 |
Runtime | ~8 hours |
Charge Time (dual) | ~9 hours |
Reclamation Width | 100cm (1 meter) |
Motor Type | High-precision resolver |
Motor Power | 7500W |
Motor RPM | 3700rpm |
Blade Material | Alloy horseshoe blades |
Motor Control | Remote knob speed control |
Lift Type | Dual hydraulic lifting arms |
Hydraulic Lift | 0-55cm |
Travel Speed | 1.2m/s |
Cruise Control | Yes |
Speed Auto-Correct | Yes |
Max Working Angle | 60 degrees |
Remote Distance | 200m |
Response Time | 50ms |
Net Weight | 860kg |
Dimensions | 210x116x80cm |
Why Choose the FT-1000L2?
The FT-1000L2 is the only choice when you need to cut brush up to 15cm on 60 degree slopes with zero emissions. For standard electric mowing, the FT-1000L/II offers the same battery and slope at lower weight. For the diesel equivalent, the FT-40 Large provides 1350mm Y-blade cutting.
Application Scenarios
Versatile performance across diverse environments
Land Reclamation
Clear overgrown land of brush, saplings, and heavy vegetation for development or agriculture.
Steep Slope Clearing
60 degree working slope for clearing heavy vegetation on dam faces and road cuts.
Overgrown Orchard Restoration
Reclaim abandoned orchards by cutting through years of accumulated brush.
Roadside Reclamation
Clear heavily overgrown roadside vegetation beyond normal maintenance levels.
Construction Site Prep
Prepare construction sites by clearing heavy vegetation before grading.
Firebreak Creation
Create firebreaks through heavy brush with zero spark risk from electric power.
Frequently Asked Questions
Everything you need to know about this product
Alloy horseshoe blades handle brush and branches up to 15cm in diameter, shredding them into organic mulch.
The FT-1000L2 has 7500W motor power, alloy horseshoe blades, and 0-55cm dual hydraulic lift. It is designed for vegetation processing, not just grass cutting.
Yes, 60 degree working angle with 860kg of structural weight provides stable operation on steep slopes even when cutting heavy vegetation.
Approximately 8 hours even under heavy-load conditions, thanks to the 30.8kWh LiFePO4 battery.
Minimal: no oil changes, fuel filters, spark plugs, or air filters. Main service items are blade inspection/replacement and hydraulic system checks.
It allows cutting height adjustment from ground level to 55cm above ground, providing unmatched versatility for different reclamation scenarios.
Get a Quote
Fill in the form below and we will contact you within 24 hours with pricing and product information